Zodiac Cyclonic Scrubbing Kit for MX8

It adds active scrubbing to the MX8's standard vacuuming action. Vacuuming lifts loose debris, but scrubbing works on the film that adheres to the pool surface, which is what causes dullness and gives algae a foothold. On a pool that is vacuumed clean but still looks flat, scrubbing is what is missing.

It is compatible with the Zodiac MX8 suction cleaner specifically. If you have a different Zodiac model, it will not fit. Send us your cleaner model and we will confirm compatibility before you order rather than after.

It is available while trade stock remains. The MX8 has been discontinued by the manufacturer and replaced by the AX20 Activ, so accessories for it are finite. If you have an MX8 in good condition and want to get more out of it, now is the time to ask.

If your MX8 is in good mechanical condition, the scrubbing kit is a low cost way to improve results and extend its useful life. If the unit is worn, tracking poorly or needing frequent repairs, put the money toward an AX20 Activ or a robotic cleaner instead. Send us photos and we will give you a straight answer.

Noticeable on surfaces that hold a biofilm, which includes most concrete and pebblecrete pools. Vacuuming alone removes what is loose. Scrubbing disturbs what is stuck, which then gets vacuumed away. The visible result is a brighter surface and less manual brushing for you.

It is designed as a straightforward accessory fit to the MX8. If you would rather not do it yourself, our technicians can fit it during a service visit and check the rest of the cleaner's condition while it is apart, which is usually worth doing on an older unit.

No. Scrubbing action on a pool cleaner is designed for regular use on standard pool interiors. If your pool surface is already deteriorating, chalking or delaminating, that is a resurfacing conversation rather than a cleaner conversation, and we can assess it for you.

It is designed to work with the MX8's normal operation rather than change it. If your MX8 already has coverage problems, those usually come from hose length, flow adjustment or worn wear parts, and adding a scrubbing kit will not fix them. We can retune the setup at the same time.

A manufacturer backed warranty applies with terms set by Zodiac. Your purchase is also covered by the New Zealand Consumer Guarantees Act. Sparkling Pools can confirm compatibility with your MX8 and handle any warranty matter through the supplier for you.

Because with a discontinued platform you want someone who can tell you whether spending on accessories makes sense or whether you are better off replacing the cleaner. We have serviced Zodiac cleaners in Auckland since 1992 and we will give you the honest answer. Call 09 570 4797.